COMPUTER SYSTEMS SERVICING NC II – TESDA COURSE MODULE

The TESDA COURSE in COMPUTER SYSTEMS SERVICING NC II consists of competencies that must possess to enable to install and configure computers systems, set-up computer networks and servers and to maintain and repair computer systems and networks.

This Qualification is packaged from the competency map of the Electronics Industry

A student who has achieved this TESDA Course in COMPUTER SYSTEMS SERVICING NC II is competent to be:

• Computer Assembler
• Computer Service Technician
• Network Technician
• Computer Maintenance Technician

COMPUTER SYSTEMS SERVICING NC II – TRAINING AND REGULATION MODULE

Course Title: COMPUTER SYSTEMS SERVICING
Level: NC II

Nominal Training Duration :

(Basic Competency) 40 Hours
(Common Competency) 80 Hours
(Core Competency) 160 Hours

Total Duration: 280 Hours

This course is designed to develop & enhance the knowledge, skills, & attitudes of a Computer Systems Service Technician, in accordance with industry standards. It covers the basic and common competencies in addition to the core competencies such as to install and configure computers systems, set-up computer networks and servers and to maintain and repair computer systems and networks.

TRAINEE ENTRY REQUIREMENTS

Trainees or students wishing to gain entry into this course should possess the following requirements:

• Can communicate either oral and written;
• Must pass the trainability/aptitude test.

COMPETENCIES REQUIRED IN COMPUTER SYSTEMS SERVICING NC II

This units of competency comprising this qualification include Basic, Common, Elective and Core Competencies.

To obtain this TESDA course in COMPUTER SYSTEMS SERVICING NC II, all units prescribed for this qualification must be achieved.

These units of competency comprising this qualification include the following:

This section gives the details and contents of the units of competency required in COMPUTER SYSTEMS SERVICING NC II. These units of competency are categorized into basic, common and core competencies.

CORE COMPETENCIES

UNIT TITLE : INSTALL AND CONFIGURE COMPUTER SYSTEMS
UNIT CODE : ELC724331

This unit covers the outcomes required in installing and configuring desktop and workstation computers systems. It consists of competencies to assemble computer hardware, install operating system and drivers for peripherals/devices, and install application software as well as to conduct testing and documentation.

1. Assemble computer hardware
   • Unit assembly is planned and prepared to ensure OH&S policies and procedures are followed in accordance with systems requirements
   • Materials necessary to complete the work are identified and obtained in accordance with established procedures and checked against systems requirements
   • Tools, equipment and testing devices needed to carry out the installation work are obtained in accordance with established procedures and checked for correct operation and safety
   • Computer hardware is assembled in accordance with established procedures and systems requirements
   • Basic-input-output-system (BIOS) configuration is performed in accordance with hardware requirements.
2. Prepare installer
   • Portable bootable devices are created in accordance with software manufacturer instruction
   • Customized installers are prepared in accordance with software utilization guide and end user agreement.
   • Installation of portable applications are carried out in accordance with software user guide and software license
3. Install operating system and drivers for peripherals/devices
   • Operating system (OS) is installed in accordance with established installation procedures and to comply with end-user requirements
   • Peripherals/devices drivers are installed and configured in accordance with manufacturer’s instructions and/or OS installation procedures.
   • OS and drivers updates/patches are accessed and installed in accordance with manufacturer’s recommendations and requirements
   • On-going checks of the quality of the work are undertaken in accordance with established procedures
4. Install application software
   • Application software are installed based on software installation guides, end-user requirements and software license agreement
   • Variation to application software installation is carried out in accordance to customer/client requirements
   • Software updates are accessed and installed in accordance with manufacturer’s recommendations and requirements
5. Conduct testing and documentation
   • Devices / systems and/or installation is tested to determine whether it conforms to requirements
   • Stress test is conducted to ensure reliability of equipment in accordance with manufacturer’s instructions and system requirements
   • 5S and 3Rs are followed according to environmental policies
   • Documentation in relation to the test is forwarded to appropriate personnel and/or authority in accordance with requirements

UNIT TITLE : SET-UP COMPUTER NETWORKS
UNIT CODE : ELC724332

This unit covers the outcomes required in setting-up computers networks for LANs and small-office home-office (SOHO) systems. It consists of competencies to install network cables, set network configuration, set router/Wi-Fi/ wireless access point/repeater configuration as well as to inspect and test the configured computer networks.

1. Install network cables
   • Cable routes are determined and planned in accordance with network design and actual installation site.
   • Network materials necessary to complete the work are identified and obtained in accordance with established procedures and checked against systems requirements
   • Tools, equipment and testing devices needed to carry out the installation work are obtained in accordance with established procedures and checked for correct operation and safety
   • Appropriate personal protective equipment is used and OHS policies and procedures are followed
   • Copper cable splicing is performed based on Electronic Industries Alliance/Telecommunications Industry Association (EIA/TIA) standards
   • Network cables and cable raceway are installed in accordance with established procedures and installation requirements
   • Installation work is performed and is checked to ensure no unnecessary damage has occurred and complies with requirements
   • OHS standards and 5S principles are followed according to enterprise requirements
   • Excess components and materials are disposed of based on WEEE directives and 3Rs waste management program.
2. Set network configuration
   • Network connectivity of each terminal is checked in accordance with network design.
   • Any fault or problem in the network system is diagnosed and remedied in line with the standard operating procedures.
   • Network interface card (NIC) settings are configured in accordance with network design.
   • Communication checking between terminals are carried out in accordance with OS network configuration guides
   • Unplanned events or conditions are responded to in accordance with established procedures
3. Set router/Wi-Fi/ wireless access point/repeater configuration
   • Client Device systems settings are configured in accordance with manufacturers’ instructions and end user preferences
   • Local area network (LAN) port is configured in accordance with manufacturers’ instructions and network design
   • Wide area network (WAN) port is configured in accordance with manufacturers’ instructions and network design
   • Wireless settings are configured in accordance manufacturers’ instructions, network design and end-user preferences
   • Security/Firewall/Advance settings are configured in accordance with manufacturers’ instructions and end user preferences
4. Inspect and test the configured computer networks
   • Final inspections are undertaken to ensure that the configuration done on the computer networks conforms with the manufacturer’s instruction/manual
   • Computer networks are checked to ensure safe operation.
   • Reports are prepared/completed according to company requirements.

UNIT TITLE : SET-UP COMPUTER SERVERS
UNIT CODE : ELC724333

This unit covers the knowledge, skills and attitudes needed to set-up computer servers for LANs and SOHO systems. It consists of competencies to set-up user access and configures network services as well as to perform testing, documentation and pre-deployment procedures.

1. Set-up user access
   • User folder is created in accordance with network operating system (NOS) features
   • User access level is configured based on NOS features and established network access policies/end-user requirements.
   • Security check is performed in accordance with established network access policies/end-user requirements.
2. Configure network services
   • Normal functions of server are checked in accordance with manufacturer’s instructions
   • Required modules /add-ons are installed/updated based on NOS installation procedures
   • Network services to be configured are confirmed based on user/system requirements
   • Operation of network services are checked based on user/system requirements
   • Unplanned events or conditions are responded to in accordance with established procedures
3. Perform testing, documentation and pre-deployment procedures
   • Pre-deployment procedures is undertaken based on enterprise policies and procedures
   • Operation and security check are undertaken based on end-user requirements
   • Reports are prepared/completed according to enterprise policies and procedures.

UNIT TITLE : MAINTAIN AND REPAIR COMPUTER SYSTEMS AND NETWORKS
UNIT CODE : ELC724334

This unit covers the knowledge, skills and attitudes needed to maintain and service computer systems and networks.

1. Plan and prepare for maintenance and repair
   • Maintenance and/or Diagnosis of faults is planned and prepared in line with job requirements.
   • Tools, equipment and testing devices needed for the maintenance are obtained and checked for correct operation and safety
   • Materials necessary to complete the work are obtained in accordance with established procedures and checked against job requirements.
   • OHS policies and procedures are followed in line with job requirements.
   • Computer systems and networks for maintenance are checked against job/service order or instructions and specifications.
2. Maintain computer systems and networks
   • Appropriate personal protective equipment is used in line with standard procedures.
   • Normal function of computer systems and networks are checked in accordance with manufacturer’s instructions.
   • Scheduled/periodic maintenance is performed in accordance with manufacturer’s requirements.
   • Where necessary, needed repairs/replacements are made in accordance with established procedures.
   • Unplanned events or conditions are responded to in accordance with established procedures
3. Diagnose faults of computer systems and networks
   • Appropriate personal protective equipment is used in line with standard procedures.
   • Faults or problems in the computer systems and networks are diagnosed according to requirements and in line with the standard procedures.
   • Contingency measures are managed and implemented in accordance with established procedures
   • Unplanned events or conditions are responded to in accordance with established procedures
4. Rectify/correct defects in computer systems and networks
5. Appropriate personal protective equipment is used in line with standard procedures.
6. Defective components or parts are replaced or corrected without damage to the surrounding environment or services
7. Adjustments, if necessary are made in accordance with established procedures
8. Unplanned events or conditions are responded to in accordance with established procedures.
9. Inspect and test the computer systems and networks
   • Final inspections are undertaken to ensure that the testing conducted on the device conforms with the manufacturer’s instruction/manual
   • Computer systems and networks are checked/tested to ensure safe operation.
   • OHS standards and 5S principles are followed according to enterprise policies
   • Work site is cleaned and cleared of all debris and left in safe condition in accordance with company procedures
   • Excess components and materials are disposed of based on WEEE directives and 3Rs waste management program.
   • Report is prepared and completed according to company requirements

COMMON COMPETENCIES

UNIT TITLE : APPLY QUALITY STANDARDS
UNIT CODE : ELC315202

This unit covers the knowledge, skills, attitudes and values needed to apply quality standards in the workplace. The unit also includes the application of relevant safety procedures and regulations, organization procedures and customer requirements.

1. Assess quality of received materials
   • Work instruction is obtained and work is carried out in accordance with standard operating procedures.
   • Received materials are checked against workplace standards and specifications.
   • Faulty materials related to work are identified and isolated.
   • Faults and any identified causes are recorded and/or reported to the supervisor concerned in accordance with workplace procedures.
   • Faulty materials are replaced in accordance with workplace procedures.
2. Assess own work
   • Documentation relative to quality within the company is identified and used.
   • Completed work is checked against workplace standards relevant to the task undertaken.
   • Errors are identified and isolated.
   • Information on the quality and other indicators of production performance are recorded in accordance with workplace procedures.
   • In cases of deviations from specific quality standards, causes are documented and reported in accordance with the workplace’ s standards operating procedures.
3. Engage in quality improvement
   • Process improvement procedures are participated in relative to workplace assignment.
   • Work is carried out in accordance with process improvement procedures.
   • Performance of operation or quality of product of service to ensure customer satisfaction is monitored.

UNIT TITLE : PERFORM COMPUTER OPERATIONS
UNIT CODE : ELC311203

This unit covers the knowledge, skills, attitudes and values needed to perform computer operations which include inputting, accessing, producing and transferring data using the appropriate hardware and software.

1. Plan and prepare for task to be taken undertaken
   • Requirements of task are determined in accordance with the required output.
   • Appropriate hardware and software are selected according to task assigned and required outcome.
   • Task is planned to ensure that OH & S guidelines and procedures are followed.
   • Client -specific guidelines and procedures are followed.
   • Required data security guidelines are applied in accordance with existing procedures.
2. Input data into computer
   • Data are entered into the computer using appropriate program/application in accordance with company procedures.
   • Accuracy of information is checked and information is saved in accordance with standard operating procedures.
   • Inputted data is stored in storage media according to requirements.
   • Work is performed within ergonomic guidelines.
3. Access information using computer
   • Correct program/application is selected based on job requirements.
   • Program/application containing the information required is accessed according to company procedures.
   • Desktop icons are correctly selected, opened and closed for navigation purposes.
   • Keyboard techniques are carried out in line with OH & S requirements for safe use of keyboards.
4. Produce output/data using computer system
5. Entered data are processed using appropriate software commands.
6. Data are printed out as required using computer hardware /peripheral devices in accordance with standard operating procedures.
7. Files and data are transferred between compatible systems using computer software, hardware/peripheral devices in accordance with standard operating procedures.
8. Use basic functions of a www-browser to locate information
   • Information requirements for internet search are established.
   • Browser is launched.
   • Search engine is loaded.
   • Appropriate search criteria/or URL of site is entered.
   • Relevant links are followed to locate required information.
   • Useful pages are bookmarked or printed as required.
9. Maintain computer equipment and systems
   • Procedures for ensuring security of data, including regular back-ups and virus checks are implemented in accordance with standard operating procedures.
   • Basic file maintenance procedures are implemented in line with the standards operating procedures.

UNIT TITLE : PERFORM MENSURATION AND CALCULATION
UNIT CODE : ELC311201

This unit covers the knowledge, skills and attitudes and values needed identify, care, handle and use measuring instruments

1. Select measuring instruments
   • Object or component to be measured is identified
   • Correct specifications are obtained from relevant source
   • Measuring tools are selected in line with job requirements
2. Carry out measurements and calculation
   • Appropriate measuring instrument is selected to achieve required outcome
   • Accurate measurements are obtained for job
   • Calculation needed to complete work tasks are performed using the four basic process of addition (+), subtraction (-), multiplication (x), and division (/)
   • Calculation involving fractions, percentages and mixed numbers are used to complete workplace tasks.
   • Numerical computation is self-checked and corrected for accuracy
   • Instruments are read to the limit of accuracy of the tool.
3. Maintain measuring instruments
   • Measuring instruments are not dropped to avoid damage
   • Measuring instruments are cleaned before and after using.
   • Proper storage of instruments undertaken according to manufacturer’s specifications and standard operating procedures.

UNIT OF COMPETENCY : PREPARE AND INTERPRET TECHNICAL DRAWING
UNIT CODE : ELC311202

This unit covers the knowledge, skills and attitudes and values needed to prepare/interpret diagrams, engineering abbreviation and drawings, symbols, dimension.

1. Identify different kinds of technical drawings
   • Correct technical drawing is selected according to job requirements.
   • Technical drawings are segregated in accordance with the types and kinds of drawings
2. Interpret technical drawing
   • Components, assemblies or objects are recognized as required.
   • Dimensions of the key features of the objects depicted in the drawing are correctly identified.
   • Symbols used in the drawing are identified and interpreted correctly.
   • Drawing is checked and validated against job requirements or equipment in accordance with standard operating procedures.
3. Prepare/make changes to electrical/electronic schematics and drawings
   • Electrical/electronic schematic is drawn and correctly identified.
   • Correct drawing is identified, equipment are selected and used in accordance with job requirements.
4. Store technical drawings and equipment /instruments
   • Care and maintenance of drawings are undertaken according to company procedures.
   • Technical drawings are recorded and inventory is prepared in accordance with company procedures.
   • Proper storage of instruments is undertaken according to company procedures.

UNIT OF COMPETENCY: USE HAND TOOLS
UNIT CODE : ELC724201

This unit covers the knowledge, skills and attitudes on the safe use, handling and maintenance of tools.

1. Plan and prepare for tasks to be undertaken
   • Tasks to be undertaken are properly identified
   • Appropriate hand tools are identified and selected according to the task requirements
2. Prepare hand tools
   • Appropriate hand tools are checked for proper operation and safety
   • Unsafe or faulty tools are identified and marked for repair according to standard company procedure
3. Use appropriate hand tools and test equipment
   • Tools are used according to tasks undertaken
   • All safety procedures in using tools are observed at all times and appropriate personal protective equipment (PPE) are used
   • Malfunctions, unplanned or unusual events are reported to the supervisor
4. Maintain hand tools
   • Tools are not dropped to avoid damage
   • Routine maintenance of tools undertaken according to standard operational procedures, principles and techniques
   • Tools are stored safely in appropriate locations in accordance with manufacturer’s specifications or standard operating procedures

UNIT TITLE : TERMINATE AND CONNECT ELECTRICAL WIRING AND ELECTRONICS CIRCUIT
UNIT CODE : ELC724202

This unit covers the knowledge, skills, (and) attitudes and values needed to terminate and connect electrical wiring and electronic circuits

1. Plan and prepare for termination/connection of electrical wiring/electronics circuits
   • Materials are checked according to specifications and tasks
   • Appropriate tools and equipment are selected according to tasks requirements
   • Task is planned to ensure OH & S guidelines and procedures are followed
   • Electrical wiring/electronic circuits are correctly prepared for connecting/termination in accordance with instructions and work site procedures
2. Terminate/connect electrical wiring/electronic circuits
   • Safety procedures in using tools are observed at all times and appropriate personal protective equipment are used
   • All work undertaken safely in accordance with the workplace and standard procedures
   • Appropriate range of methods in termination/connection are used according to specifications, manufacturer’s requirements and safety
   • Correct sequence of operation is followed
   • Accessories used are adjusted, if necessary
   • Confirm termination/connection undertaken successfully in accordance with job specification
3. Test termination/connections of electrical wiring/electronics circuits
   • Testing of all completed termination/ connections of electric wiring/electronic circuits is conducted for compliance with specifications and regulations using appropriate procedures and equipment
   • Wiring and circuits are checked using specified testing procedures
   • Unplanned events or conditions are responded to in accordance with established procedures

UNIT OF COMPETENCY: TEST ELECTRONIC COMPONENTS
UNIT CODE : ELC724205

This unit covers the knowledge, skills and attitudes required to test electronic components. It includes competencies in determining the criteria for testing electronics components, planning an approach for component testing, testing the components and evaluating the testing process.

1. Determine criteria for testing electronics components
   • Work instructions are obtained and clarified based on job order or client requirements
   • Responsible person is consulted for effective and proper work coordination
   • Data sheets/Application notes are obtained and interpreted based on manufacturer’s specifications
   • Testing criteria are defined to ensure that components meet technical and quality requirements
   • Document and communicate testing criteria to relevant personnel
2. Plan an approach for component testing
   • Various testing methods are Identified based on types of electronic components
   • Characteristics and appropriateness of testing methods to be used during development and on completion is determined
   • Testing methods are considered/selected in relation to appropriate testing strategy
   • Plan for testing components is developed at specified points during development and on completion
   • Required test & measuring instruments and tools are prepared and checked in accordance with established procedures
   • Records system is established to document testing results, including problems and faults
3. Test components
   • Testing methods are applied to ensure that products meet creative, production and technical requirements
   • Problems and faults detected by testing are recorded and remedial steps taken in records system is documented
   • Problems and faults detected during testing are resolved in accordance with agreed project or industry practice
   • Evaluate final products against the previously determined criteria
   • Testing process is documented and summarized evaluation report is submitted to relevant personnel
4. Evaluate the testing process
   • Testing methods that were successful and those that led to difficulties are identified based on industry standards
   • Testing process and records system are evaluated based on standard procedures
   • Test results/findings are documented for subsequent components testing.

BASIC COMPETENCIES

UNIT OF COMPETENCY : PARTICIPATE IN WORKPLACE COMMUNICATION
UNIT CODE : 500311105

This unit covers the knowledge, skills and attitudes required to gather, interpret and convey information in response to workplace requirements.

1. Obtain and convey workplace information
   • Specific and relevant information is accessed from appropriate sources
   • Effective questioning, active listening and speaking skills are used together and convey information
   • Appropriate medium is used to transfer information and ideas
   • Appropriate non- verbal communication is used
   • Appropriate lines of communication with supervisors and colleagues are identified and followed
   • Defined workplace procedures for the location and storage of information are used
   • Personal interaction is carried out clearly and concisely
2. Participate in workplace meetings and discussions
   • Team meetings are at ended on time
   • Own opinions are clear expressed and those of others are listened to without interruption
   • Meeting inputs are consistent with the meeting purpose and established protocols
   • Workplace interactions are conducted in a courteous manner
   • Questions about simple routine workplace procedures and matters concerning working conditions of employment are asked and responded to.
   • Meetings outcomes are interpreted and implemented
3. Complete relevant work related documents
   • Range of forms relating to conditions of employment are completed accurately and legibly
   • Workplace data is recorded on standard workplace forms and documents
   • Basic mathematical processes are used for routine calculations
   • Errors in recording information on forms/documents are identified and properly acted upon
   • Reporting requirements to supervisor are completed according to organizational guidelines

UNIT OF COMPETENCY : WORK IN TEAM ENVIRONMENT
UNIT CODE : 500311106

This unit covers the skills, knowledge and attitudes to identify role and responsibility as a member of a team.

1. Describe team role and scope
   • The role and objective of the team is identified from available sources of information
   • Team parameters, reporting relationships and responsibilities are identified from team discussions and appropriate external sources.
2. Identify own role and responsibility within team
   • Individual role and responsibilities within the team environment are identified.
   • Roles and responsibility of other team members are identified and recognized.
   • Reporting relationships within team and external to team are identified.
3. Work as a team member
   • Effective and appropriate forms of communications used and interactions undertaken with team members who contribute to known team activities and objectives.
   • Effective and appropriate contributions made to complement team activities and objectives, based on individual skills and competencies and workplace context.
   • Observed protocols in reporting using standard operating procedures.
   • Contribute to the development of team work plans based on an understanding of team’s role and objectives and individual competencies of the members.

UNIT OF COMPETENCY : PRACTICE CAREER PROFESSIONALISM
UNIT CODE : 500311107

This unit covers the knowledge, skills and attitudes in promoting career growth and advancement.

1. Integrate personal objectives with organizational goals
   • Personal growth and work plans are pursued towards improving the qualifications set for the profession
   • Intra- and interpersonal relationships is are maintained in the course of managing oneself based on performance evaluation
   • Commitment to the organization and its goal is demonstrated in the performance of duties
2. Set and meet work priorities
   • Competing demands are prioritized to achieve personal, team and organizational goals and objectives.
   • Resources are utilized efficiently and effectively to manage work priorities and commitments
   • Practices along economic use and maintenance of equipment and facilities are followed as per established procedures
3. Maintain professional growth and development
   • Trainings and career opportunities are identified and availed of based on job requirements
   • Recognitions are sought/received and demonstrated as proof of career advancement
   • Licenses and/or certifications relevant to job and career are obtained and renewed

UNIT OF COMPETENCY : PRACTICE OCCUPATIONAL HEALTH AND SAFETY PROCEDURES
UNIT CODE : 500311108

This unit covers the outcomes required to comply with regulatory and organizational requirements for occupational health and safety.

1. Identify hazards and risks
   • Safety regulations and workplace safety and hazard control practices and procedures are clarified and explained based on organization procedures
   • Hazards/risks in the workplace and their corresponding indicators are identified to minimize or eliminate risk to co-workers, workplace and environment in accordance with organization procedures
   • Contingency measures during workplace accidents, fire and other emergencies are recognized and established in accordance with organization procedures
2. Evaluate hazards and risks
   • Terms of maximum tolerable limits which when exceeded will result in harm or damage are identified based on threshold limit values (TLV)
   • Effects of the hazards are determined
   • OHS issues and/or concerns and identified safety hazards are reported to designated personnel in accordance with workplace requirements and relevant workplace OHS legislation
3. Control hazards and risks
   • Occupational Health and Safety (OHS) procedures for controlling hazards/risks in workplace are consistently
     followed
   • Procedures for dealing with workplace accidents, fire and emergencies are followed in accordance with organization OHS policies
   • Personal protective equipment (PPE) is correctly used in accordance with organization OHS procedures and practices
   • Appropriate assistance is provided in the event of a workplace emergency in accordance with established organization protocol
4. Maintain OHS awareness
   • Emergency-related drills and trainings are participated in as per established organization guidelines and procedures
   • OHS personal records are completed and updated in accordance with workplace requirements

DEFINITION OF TERMS

GENERAL

• Certification – is the process of verifying and validating the competencies of a person through assessment
• Certificate of Competency (COC) – is a certification issued to individuals who pass the assessment for a single unit or cluster of units of competency
• Common Competencies – are the skills and knowledge needed by all people working in a particular industry
• Competency – is the possession and application of knowledge, skills and attitudes to perform work activities to the standard expected in the workplace
• Competency Assessment – is the process of collecting evidence and making judgments on whether competency has been achieved
• Competency Standard (CS) – is the industry-determined specification of competencies required for effective work performance
• Context of Assessment – refers to the place where assessment is to be conducted or carried out
• Core Competencies – are the specific skills and knowledge needed in a particular area of work – industry sector/occupation/job role
• Critical aspects of competency – refers to the evidence that is essential for successful performance of the unit of competency
• Elective Competencies – are the additional skills and knowledge required by the individual or enterprise for work
• Elements – are the building blocks of a unit of competency. They describe in outcome terms the functions that a person performs in the workplace.
• Evidence Guide – is a component of the unit of competency that defines or identifies the evidences required to determine the competence of the individual. It provides information on critical aspects of competency, underpinning knowledge, underpinning skills, resource implications, assessment method and context of assessment
• Level – refers to the category of skills and knowledge required to do a job
• Method of Assessment – refers to the ways of collecting evidence and when, evidence should be collected
• National Certificate (NC) – is a certification issued to individuals who achieve all the required units of competency for a national qualification defined under the Training Regulations. NCs are aligned to specific levels within the PTQF
• Performance Criteria – are evaluative statements that specify what is to be assessed and the required level of performance
• Qualification – is a cluster of units of competencies that meets job roles and is significant in the workplace. It is also a certification awarded to a person on successful completion of a course in recognition of having demonstrated competencies in an industry sector
• Range of Variables – describes the circumstances or context in which the work is to be performed
• Recognition of Prior Learning (RPL) – is the acknowledgement of an individual’s skills, knowledge and attitudes gained from life and work experiences outside registered training programs
• Resource Implications – refers to the resources needed for the successful performance of the work activity described in the unit of competency. It includes work environment and conditions, materials, tools and equipment
• Basic Competencies – are the skills and knowledge that everyone needs for work
• Training Regulations (TR) – refers to the document promulgated and issued by TESDA consisting of competency standards, national qualifications and training guidelines for specific sectors/occupations. The TR serves as basis for establishment of qualification and certification under the PTQF. It also serves as guide for development of competency-based curricula and instructional materials including registration of TVET programs offered by TVET providers
• Underpinning Knowledge – refers to the competency that involves in applying knowledge to perform work activities. It includes specific knowledge that is essential to the performance of the competency
• Underpinning Skills – refers to the list of the skills needed to achieve the elements and performance criteria in the unit of competency. It includes generic and industry specific skills
• Unit of Competency – is a component of the competency standards stating a specific key function or role in a particular job or occupation; it is the smallest component of achievement that can be assessed and certified under the PTQF

SECTOR SPECIFIC

• Computer System – The complete computer made up of the CPU, memory and related electronics (main cabinet), all the peripheral devices connected to it and its operating system. Computer systems fall into two broad divisions: clients and servers. Client machines fall into three categories from low to high end: laptop, desktop and workstation. Servers range from small to large: low-end servers, midrange servers and mainframes.
• Computer Network, or simply a Network, is a collection of computers and other hardware interconnected by communication channels that allow sharing of resources and information. Where at least one process in one device is able to send/receive data to/from at least one process residing in a remote device, then the two devices are said to be in a network. It is a group of devices connected to each other. Networks may be classified into a wide variety of characteristics, such as the medium used to transport the data, communications protocol used, scale, topology, benefit, and organizational scope.
• Configuration – The makeup of a system. To “configure” is to choose options in order to create a custom system. “Configurability” is a system’s ability to be changed or customized.
• Connector – Any plug and socket that links two devices together. Although taken for granted and rarely in the limelight, connectors are a huge industry, and the quality of these components is more critical than most people would imagine. When not designed or constructed properly, they often become the weakest element in an electronic system.
• Display Adapter – A plug-in card in a desktop computer that converts the images created in the computer to the electronic signals required by the monitor. It determines the maximum resolution, refresh rate and number of colors that can be displayed, which the monitor must also be able to support. On many PC motherboards, the display adapter circuits are built into the chipset, and an AGP or PCI card is not required.
• Expansion Board – A printed circuit board that plugs into an expansion slot and extends the computer’s capability to control a peripheral device. All the boards (cards) that plug into a computer’s bus are expansion boards, such as display adapters, disk controllers, network adapters and sound cards.
• Expansion Bus – An input/output bus typically comprised of a series of slots on the motherboard. Expansion boards (cards) are plugged into the bus. ISA and PCI are the common expansion buses in a PC.
• Graphical User Interface – A graphics-based user interface that incorporates movable windows, icons and a mouse. The ability to resize application windows and change style and size of fonts are the significant advantages of a GUI vs. a character-based interface. GUIs have become the standard way users interact with a computer, and the major GUIs are the Windows and Mac interfaces along with Motif for Unix and the GNOME and KDE interfaces for Linux.
• LAN – a local area network (LAN) is a computer network that interconnects computers in a limited area such as a home, school, computer laboratory, or office building using network media. The defining characteristics of LANs, in contrast to wide area networks (WANs), include their usually higher data-transfer rates, smaller geographic area, and lack of a need for leased telecommunication lines.
• Motherboard – Also called the “system board,” it is the main printed circuit board in an electronic device, which contains sockets that accept additional boards. In a desktop computer, the motherboard contains the CPU, chipset, PCI bus slots, AGP slot, memory sockets and controller circuits for the keyboard, mouse, disks and printer. It may also have built-in controllers for modem, sound, display and network, obviating the need to plug in a card.
• Networks – see Computer Network.
• Operating System – The master control program that runs the computer. The first program loaded when the computer is turned on, its main part, the “kernel,” resides in memory at all times. The operating system sets the standards for all application programs that run in the computer. The applications “talk to” the operating system for all user interfaces and file management operations.
• Peripheral -Any hardware device connected to a computer, such as a monitor, keyboard, printer, disk, tape, graphics tablet, scanner, joy stick, paddle or mouse
• Server – A computer system in a network that is shared by multiple users. Servers come in all sizes from x86-based PCs to IBM mainframes. A server may have a keyboard, monitor and mouse directly attached, or one keyboard, monitor and mouse may connect to any number of servers via a KVM switch. Servers may be also be accessed only through a network connection as well.
• Sound Card – Also called a “sound board” or “audio adapter,” it is a computer expansion board that records and plays back sound, providing inputs from a microphone or other sound source and outputs to speakers or an external amplifier. The de facto standard for sound card compatibility in PCs is Creative Labs’ Sound Blaster.
• User Interface – All graphics based today, the user interface includes the windows, menus and method of interaction between you and the computer. Prior to the Mac, Windows and Motif (UNIX) interfaces, all interaction was based on commands entered by the user. Operating systems may support optional interfaces and allow a new shell, or skin, to be used instead.
• Virus – Software used to infect a computer. After the virus code is written, it is buried within an existing program. Once that program is executed, the virus code is activated and attaches copies of itself to other programs in the system. Infected programs copy the virus to other programs.
• WAN – a Wide Area Network (WAN) is a network that covers a broad area (i.e., any telecommunications network that links across metropolitan, regional, or national boundaries) using private or public network transports. Business and government entities utilize WANs to relay data among employees, clients, buyers, and suppliers from various geographical locations. In essence, this mode of telecommunication allows a business to effectively carry out its daily function regardless of location
• WEEE Directives – the prevention of waste electrical and electronic equipment (WEEE), and in addition, the reuse, recycling and other forms of recovery of such wastes so as to reduce the disposal of waste. It also seeks to improve the environmental performance of all operators involved in the life cycle of electrical and electronic equipment, e.g. producers, distributors and consumers and in particular those operators directly involved in the treatment of waste electrical and electronic equipment.

Share the post "COMPUTER SYSTEMS SERVICING NC II – TESDA COURSE MODULE"

Related Posts:

• City College of Technology and Trade City College of Technology and Trade is an institution accredited…
• Datacom Institute of Computer Technology Corporation… Datacom Institute of Computer Technology Corporation - Rosario is an…
• Datacom Institute of Computer Technology Corporation - Imus Datacom Institute of Computer Technology Corporation - Imus is an…
• INSTRUMENTATION AND CONTROL SERVICING NC II - TESDA… TESDA TRAINING REGULATIONS FOR INSTRUMENTATION AND CONTROL SERVICING NC II…
• St. Anne Technical Vocational Training and Assessment Center St. Anne Technical Vocational Training and Assessment Center is an…
• MECHATRONICS SERVICING NC II - TESDA COURSE MODULE TESDA TRAINING REGULATIONS FOR MECHATRONICS SERVICING NC II The TESDA…
• BROADBAND INSTALLATION (FIXED WIRELESS SYSTEMS) NC… TESDA TRAINING REGULATIONS BROADBAND INSTALLATION (FIXED WIRELESS SYSTEMS) NC II…
• CONSUMER ELECTRONICS EQUIPMENT SERVICING NC III -… TESDA TRAINING REGULATIONS FOR CONSUMER ELECTRONICS EQUIPMENT SERVICING NC III…
• CONSUMER ELECTRONICS SERVICING NC IV - TESDA COURSE MODULE TESDA TRAINING REGULATIONS FOR CONSUMER ELECTRONICS EQUIPMENT SERVICING NC IV…
• INSTRUMENTATION AND CONTROL SERVICING NC III - TESDA… TESDA TRAINING REGULATIONS FOR INSTRUMENTATION AND CONTROL SERVICING NC III…

302 Comments

Cancel reply

Tec-Voc says:

Tec-Voc says:

Good day po. Ask ko lang po if meron pong Computer Systems Servicing NC II na malapit sa Shaw Mall, Addition Hills, Mandaluyong? thanks

Tec-Voc says:

Gateways Institute of Science and Technology, Inc.
3/F Dela Rosa Bldg., cor. Shaw Blvd., Kalentong St., Barangay DaangBakal, Mandaluyong City
8534-4478 La Salle Greenhills, Inc.
343 Ortigas Ave., Mandaluyong City
8721-2000 Local: 763/ 09173895787

Tec-Voc says:

Access Pasig Computer and Technical Colleges Inc.
No.11 M.H. Del Pilar St., Brgy. San Nicolas, Pasig
8532-7885 Asia Source iCollege Inc.
One Victoria Plaza, A. Mabini, Kapasigan, Pasig City
8553-5202, 8637-9895, 09195086852, 09190025472, Asian Entrepreneurs Technological Institute, Inc.
115 E. Santos Ave., Bambang, Pasig City
7746-0097 BELART Training and Assesssment Center Inc.
682 Shaw Blvd., Kapitolyo, Pasig City
9395994949 Capellan Institute of Technology, Inc.
No. 35 Dr. Pilapil St., Sagad, Pasig City
8641-5648 E-Global International Communications Inc.
Mezzanine A 707 Shaw Blvd. Brgy. Kapitolyo, Pasig City
7719-0914 Hyper Young Institute of Technology Inc.
113 M.H. Del Pilar Street Palatiw, Pasig City
8250-1464 MFI Polytechnic Institute Inc.
MFI Bldg., Ortigas Ave., Barangay Ugong, Pasig City
8632-0756 to 67 / 8634-4970 Mindtech Training & Development Institute, Inc.
No. 163 Dr. Sixto Avenue, Brgy. Rosario, Pasig City
719-2089/ 0917-841-4317 TeleCall Institute of Technology Inc.
5/F, 15F, 25/F Raffles Corporate Center, F. Ortigas Jr. Rd, San Antonio Ortigas Center, Pasig City
420-6488/ 09163093032

Tec-Voc says:

Santa Rosa Manpower Training Center
BSRV-1 Brgy. Tagapo, City of Santa Rosa, Laguna
508-0392 Areza Institute of Technology Inc.
Areza Town Center, Brgy. Canlalay, Biñan City, Laguna
(049) 411-5397 International Electronics and Technical Institute (Biñan), Inc.
6F Caridad Mendoza Business Center, Km. 33, National Highway, Biñan City, Laguna
(049) 511-9385/86 Jacobo Z. Gonzales Memorial School of Arts and Trades
San Antonio, Biñan, Laguna
(049) 511-8059

Tec-Voc says:

Tec-Voc says:

Colegio de Sto. Nino Meycauayan Corp
-Computer Systems Servicing NC II
B3 Nucentro Town, EMA Town Center, El Camino, Camalig, Meycauayan, Bulacan
9178174793/ 09267945762/ 09359545498

Tec-Voc says:

Bright International Special School of Urdaneta, Inc.
San Vicente East, Urdaneta City, Pangasinan
0926-651-9946 Pangasinan School of Excellence Incorporated
Zone 3 Nancamaliran West 5, City of Urdaneta, Pangasinan
9989992231 Sta. Catalina’s College of Science and Technology, Umingan Branch, Inc.
2F Delos Santos Bldg., Brgy. Caurdanetaan, Poblacion East, Umingan, Pangasinan
(075) 513-7183/ 09989972025 Urdaneta City University
No. 1 San Vicente West, Urdaneta City, Pangasinan
(075) 568-2475/ 7612 Vox Humana Technological College, Inc.
#20 Alonzo St., Poblacion, Urdaneta, Pangasinan
9167315104

Tec-Voc says:

Bayambang Polytechnic College
Zone I, Bayambang, Pangasinan
9190658365 Bright International Special School of Urdaneta, Inc.
San Vicente East, Urdaneta City, Pangasinan
0926-651-9946 Bugallon E-Center
Romulo Highway Poblacion, Bugallon, Pangasinan
9688571965 Excel Technical & Educational School of Villasis Incorporated
Blk 1 Ground Floor RC-LC Bldg. San Lorenzo St. Poblacion Unzad Villasis, Pangasinan
0951-841-7130 Family Child Development School, Incorporated
Galaban St., Manaoag, Pangasinan
075-529-34360948018669409672550577 Hope of Melbourne Colleges Foundation, Inc.
Rizal St., Poblacion West, Umingan, Pangasinan
(075)632-5350/0908 342 8011 IAB Global Training Center Inc.
McKinley Corner Tavera Streets Poblacion, Binalonan, Pangasinan
075-562-6007 iTech Computer Academy, Inc.
No. 80 Rizal Ave., Malasiqui, Pangasinan
(075) 536-6096 Ken Institute of Technology Incorporated
359 B. Fernandez Compound, Perez Blvd., Pogo Chico, Dagupan City, Pangasinan
09431317778 / 09052908850 Lite Technical and Educational Center, Inc.
YMCA Bldg. Tapuac Dist., Dagupan City, Pangasinan
075-653-4648 Maxima Technical and Skills Training Institute Inc.
No. 20 Tandoc Bldg., Perez Blvd., Dagupan City, Pangasinan
(075) 632-2478/23-230209174055250 Mina Skills Training and Assessment Academy Inc.
San Lorenzo Cor. San Patricio St., Zone I (Pob.), Villasis, Pangasinan
9951009768 Omni Tech Skills Development Corp.
#84 Arellano Bani St. Pantal, Dagupan City, Pangasinan
0917-579-2203 Pangasinan School of Arts and Trades
Alvear St. West, Lingayen, Pangasinan
075-662-2077 / 075-633-0933075-523-5284 Pangasinan School of Excellence Incorporated
Zone 3 Nancamaliran West 5, City of Urdaneta, Pangasinan
9989992231 Pines Center of Learning Excellence Inc.
Bolo, Labrador, Pangasinan
9455219248 Prime Brilliant Minds Academy Inc.
Mc Arthur Highway, Lucao District, Dagupan City
9274487500 Pugaro Manaoag Technical Training and Assessment Center, Inc.
Pugaro, Manaoag, Pangasinan
075-510-7639/ 09851268923 Red Rover Academia Inc.
Quezon Boulevard, Poblacion, Basista, Pangasinan
0968-415-2572 Skills Solution Training and Assessment Center Inc.
Naguilayan, Binmaley, Pangasinan
075-540-6230 St. Anne Technical Vocational Training and Assessment Center Inc.
Poblacion West, Santa Maria, Pangasinan
9285200488 St. Anne Technical Vocational Training and Assessment Center Inc. (BRANCH)
Gayaman, Binmaley, Pangasinan
9285200488 St. Clare Assessment and Training Center Inc.
Palaris (Pob.), San Carlos City, Pangasinan
9178049933 St. Ignatius Technical Vocational Training and Assessment Center Inc.
Malued, Dagupan City, Pangasinan
(075) 522-36760951907153 Sta. Catalina’s College of Science and Technology, Umingan Branch, Inc.
2F Delos Santos Bldg., Brgy. Caurdanetaan, Poblacion East, Umingan, Pangasinan
(075) 513-7183/ 09989972025 Urdaneta City University
No. 1 San Vicente West, Urdaneta City, Pangasinan
(075) 568-2475/ 7612 Vox Humana Technological College, Inc.
#20 Alonzo St., Poblacion, Urdaneta, Pangasinan
9167315104 Wellcare Institute of Science and Technology, Inc.
Zone II, Pinmaludpod, Urdaneta City
(075) 540-1856/ 568-8225 Western Horizon Skills Training and Assessment Center Inc.
Bued I, City of Alaminos, Pangasinan
9054952599

Goodevening po saan po pwede mag enroll ng NC2 Computer Servicing System from Negros Occidental po. Salamat

Tec-Voc says:

CEDAR College, Inc.
National Highway, Cadiz City
(034)720-7566/493-1371 E-Tech Global Training Academy Inc.
Unit 2E Metrodome Event Center, Araneta St., Bacolod City
34-7041700 Lasaltech, Inc.
2F CAP Bldg., Galo Street, Bacolod City
433-3520 Mahgargar Inc.
2nd Floor Montoya Bldg., corner Rizal-Hilado St., Brgy. 23, Bacolod City, Negros Occidental
474-0161 MDM- Sagay College, Inc.
National Highway, Poblacion 2, Sagay City, Negros Occidental
488-0531 Negros Golden Heritage Company, Incorporated
Cor. Mabini J.M Basa St., Brgy. III, Poblacion, La Carlota City, Negros Occidental
460 – 2576/ 09287382518 NFSP Sugar Workers Foundation, Inc.
NFSP Building, Bacolod-Murcia Road, Brgy. Alijis, Bacolod City
441-1533 North Negros College, Inc.
Cor. ‘Villena -Juan Luna Sts., Cadiz City -Main Campus (with annex buildings located at Cabahug-Lopez Jaena Sts., and Talabaan, Brgy. Daga, Cadiz City)
493-0396;/720-8296/493-1178 Regional Training Center – Talisay
Felipe Lacson St., Talisay City, Neg. Occ.
474-2135/712-7283 Technological Foundation Institute of Bago City, Inc.
Rafael Salas Drive, Brgy. Balingasag, Bago City, Negros Occidental
454-2443 USAT College of Sagay City, Inc.
National Highway, Barangay Poblacion 1, Sagay City, Negros Occidental
722-8905

Tec-Voc says:

ACLC College of Ormoc City, Inc.
Lilia Avenue, Brgy. Cogon, Ormoc City
(053)561-3328/ ‘09619713049 ACLC College of Tacloban City, Inc.
Real Street, Brgy. 84, Tacloban City
(053) 523-8689 or 321-1888 Arc Tutorials Learning Services Inc.
Brgy. Consolacion, Sogod, Southern Leyte
9266688785 Asian Development Foundation College, Inc.
Bliss Sagkahan, Tacloban City
(053)321-3215/ 09052201459/ 09173049658/ 09216784121 Calubian National Vocational School (CNVS)
Brgy. Cabalquinto, Calubian, Leyte
(053) 549-2264/ 09195197924 Innovate Information and Communications Technology Systems, Inc.
2nd Floor, F. Mendoza Realty Complex, Sto. Niño St., Tacloban City
(053)5230674 Regional Training Center
Brgy. Abucay, Tacloban City
321-8249/ 8121/09777720428 Second Life Educational Services Inc.
2nd Floor, Leyte Academic Center, Pawing Palo Leyte
053-888-5380 St. Therese Educational Foundation of Tacloban, Inc.
Brgy. 91, Abucay, Tacloban City
053-325-3464/09179864091 Tacloban Institute of Electronics (TIE), Inc.
IRM Bldg., Sto. Niño Shrine Corp., Real Street, Tacloban City
(053) 888-5298/325-8844/ 0939169828628 Universal Skills Training and Assessment Center Inc.
3rd Floor, AW Realty San Vidal Street, Ormoc City, Leyte
09946812875/ 09664028777 Western Leyte College of Ormoc City Inc.
A. Bonifacio St., Ormoc City
(053)255-8549/ 09484748933

Tec-Voc says:

ADDHIYA’ FOUNDATION, INC.
#394-A Fronting Maestra Vicenta, Sta. Maria, Zamboanga City
0927-353-6923 Alyesford Aba Philippines Ferndale Colleges – Zamboanga Peninsula Incorporated
B.G. Building, Veterans Avenue, Zamboanga City CADDMAX COLLEGE, INC.
3rd Flr., Doña Vicenta Bldg., Gov. Lim Ave., Zamboanga City
09351702565/ 09263002004 Global Technical School of Zamboanga, Inc.
Tomas Claudio St., Zamboanga City
(062) 990-1378 / 0905-305-2591 GOOD SHEPHERD TRAINING AND ASSESSMENT CENTER, INC.
109 Old Highway, Guiwan, Zamboanga City
984-0630 / 955-2058 PHILIPPINE MALAYA COLLEGE, INC.
Mampang, Zamboanga City
0955-014-2382 REGIONAL TRAINING CENTER – ZAMBOANGA PENINSULA
Talungon St., San Roque, Zamboanga City
(062) 955-9586/ 991-9586 SOUTHERN CITY COLLEGES, INC.
San Jose Gusu, Zamboanga City
(062) 992-7269 Vitali Technical Vocational School
Mialim, Vitali, Zamboanga City
CP#09267245423- Mr. Piedad; 09209212034; Rene Winzelle International College, Inc.
Tomas Claudio St., Zamboanga City
(062)955-5811 Z.C. SKILLS ACADEMY, INC.
Baliwasan Chico, Zamboanga City
0918-957-3350

Tec-Voc says:

Cronasia Foundation College, Inc.
Andres-Dizon Building, Pioneer Avenue , Barangay West, General Santos City
552-4051/554-6323 Holy Trinity College of General Santos City, Incorporated
Fiscal Gregorio Daproza Avenue, General Santos City
552-5578/552-3905 New Brighton School of the Philippines, Inc.
11 Quezon Avenue, Dadiangas West, General Santos City, South Cotabato Notre Dame of Dadiangas University, Inc.
Marist Avenue, General Santos City
Tel No. (083)552-4444 local 2300 STI College General Santos, Inc.
J. Catolico Sr. Ave., Lagao, General Santos City
(083)552-5717

Tec-Voc says:

1 AND ALL TECHNICAL SCHOOL, INC.
Zone 2, Kauswagan, Cagayan de Oro City
0917-798-1978 ASIAN BUSINESS CABLETOW COOPERATIVE ACADEMY (ABCCA), INC.
Consuelo Bldg., Corrales Ave., Cagayan de Oro City
0917-3290-494 CAGAYAN DE ORO COLLEGE, INC.
Max Suniel Street, Carmen, Cagayan de Oro City
0926-2920-483 / ‘0917-7771-761 Crossroads Training Institute, Inc.
Kia Motors, Gusa, Cagayan de Oro City
0917-6343-009/0916-932-5467 Four J and E Technical Schjool, Inc.
2nd Floor Sumilao Building, Max Suniel Street, Carmen, Cagayan de Oro City
0917 763 2502 ILIGAN COMPUTER INSTITUTE, INC.
Zone 2, Bugo, Cagayan de Oro City
0917-322-4134/ 882-0640 Informatics College Cebu, Inc.
Stary Building Max Suniel Street, Carmen, Cagayan de Oro City
323-2914 / 0917-703-3467 ST. GREGORY, THE GREAT TECHNICAL SCHOOL, INC.
AM Velez Building, Vamenta Boulevard-Gumamela Streets, Carmen, Cagayan de Oro City
(088) 880-0794 / 0917-797-5963/ 0917-797-5289

Tec-Voc says:

Good day ma’am/sir I’m Johnny D. Benben I want to know if malaybalay is having a technical school
Gusto mn gd nako maka pa enroll para maka Balo ug puhon² ma gamit pd nako

Hello po. San po may training center po ng CSS NCII?
Location: Pasay/Makati/. Sana po masagot. Thank you!

Tec-Voc says:

Mary Grace International Education Inc.
3rd Floor Gateway Building Taft Avenue, Cartimar Shopping Center, Barangay 39, Pasay City
0917-527-7351 International Electronics and Technical Institute, Inc.
Room 402, 4th Floor Guadalupe Comm’l Complex EDSA Guadalupe, Makati City
882-0435 Philippine Call Center Institute Inc.
3/F Sterling Annex, 2302 Chino Roces Ext., Brgy. Magallanes, Makati City

Tec-Voc says:

3A Prime Hospitality Training and Assessment Center Inc.
362 Don Mariano Cui St. corner N. Escario St. Capitol Site, Cebu City
(032) 328-9150 A.S. Fortuna St., Mandaue City, Cebu
(032) 3449320/ 345-6873/ 345-5790 Bering Institute of Skills Training and Assessment Center Inc.
Room 208, Conchita Building, Osmena Boulevard Barangay Sta. Cruz, Cebu City
0923-3373777 Cebu Call Center Academy Inc.
#79 VEG Building, General Maxilom Ave., Cebu City, Cebu
(032) 341-3220/ 0906-5282855/ 0921-8528404/ (032) 316-3655 Cebu Technical Vocational Training and Assessment Academy Inc.
Bai Center, Cebu South Road, Basak, San Nicolas, Cebu City
417-5254, 0933-3455013 (032) 417-5154 09430542776 Center for Industrial Technology & Enterprise (CITE) Technical Institute, Inc.
San Jose, Talamban, Cebu City
(032) 346-1611/344-0899/ 2462650 College of Technological Sciences-Cebu, Inc.
Natalio Bacalso Ave. Corner Rallos Sr. Street, Sambag 1, Cebu City
(032) 256-1302 to 04; 255-2331; Fax 254-2434 090798917562 ELE Technical Training & Assessment Center Corp.
4308 Osmeña St., Gunob, Lapu-Lapu City
238-2057/ 340-5476 Kapunungan Alang Sa Kauswagan Sa Kasadpan – Sugbu, Inc.
KAKASAKA Training Center, Barangay Ibo, Toledo City, Cebu, Philippines
(032) 384-9554 09162184269 Metrologyx Training and Assessment Center Inc.
Lot 6307-A-11-A, Barangay Cadulawan, Minglanilla, Cebu
344-0467/420-3848 Regional Training Center – Cebu
Archbishop Reyes Ave., Cor. Salinas Drive, Lahug, Cebu City
412-7267 416-8876 Rosemont Hills Montessori College, Inc
Deca Homes, Sabang, Danao City, Cebu, Philippines, 6004
0943-688-6789/0922-868-7314 / (032) 383-2392/517-3278 Saint James Academy of Skills Technology, Inc.
Poblacion, Compostela, Cebu
(032) 4258424/ 4258424 425-6061 2602649 Sisters of Mary Technical Education Institute, Cebu, Inc.
J.P. Rizal St., Talisay City, Cebu
272-6865, 272-3828 St. Cecilia’s College – Cebu, Inc.
Hi-way Poblacion, Minglanilla, Cebu
(032) 268-4746 / 09212923944 TMJ Technology Skills Training Institute and Assessment Center
3F Southface Arcade Bldg., F. Deiparine St., Tabunok, Talisay City, Cebu
0933-5083888 University of San Jose-Recoletos Inc.
St. Ezekiel Moreno Building, Basak Campus, Pardo, Cebu City
(032) 354-8405/412-9511 Visayan Institute of Technology Agribusiness and Livelihood Skills Inc.
Sitio Tiltil Poblacion 2nd District, Samboan, Cebu, Region VII (Central Visayas), 6027
9663004538

Tec-Voc says:

Datacom Institute of Computer Technology Corporation
9115 General Trias Drive, Tejeros Convention,
(046) 437-1938

Tec-Voc says:

Tec-Voc says:

Christian Academy in Davao Oriental Technological Colleges, Inc.
Kamagong-Tindalo Sts., Brgy. Sainz, Mati, Davao Oriental Davao Oriental Polytechnic Institute
Roxas-Panuncialman Sts., Brgy. Poblacion, Lupon, Davao Oriental
(087) 808-0125 St. Mary’s College of Baganga, Inc.
Concepcion St., Poblacion, Baganga, Davao Oriental
09266883218/ 09207920562/ 09296855191

Tec-Voc says:

ADDHIYA’ FOUNDATION, INC.
#394-A Fronting Maestra Vicenta, Sta. Maria, Zamboanga City
0927-353-6923 Alyesford Aba Philippines Ferndale Colleges – Zamboanga Peninsula Incorporated
B.G. Building, Veterans Avenue, Zamboanga City CADDMAX College, Inc.
Dona Vicenta Bldg., Pilar St., Gov. Lim Avenue, Zambo. City
09351702565/ 09263002004 Global Technical School of Zamboanga, Inc.
Tomas Claudio St., Zamboanga City
(062) 990-1378 / 0905-305-2591 GOOD SHEPHERD TRAINING AND ASSESSMENT CENTER, INC.
109 Old Highway, Guiwan, Zamboanga City
984-0630 / 955-2058 Philippine Malaya College, Inc.
Mampang, Zamboanga City
0955-014-2382 REGIONAL TRAINING CENTER – ZAMBOANGA PENINSULA
Talungon St., San Roque, Zamboanga City
(062) 955-9586/ 991-9586 Southern City Colleges, Inc.
Pilar St., Zamboanga City
(062) 991-1847/992-6492/991-1819/992-2241/992-6492 Vitali Technical Vocational School
Mialim, Vitali, Zamboanga City
CP#09267245423- Mr. Piedad; 09209212034; Rene Winzelle International College, Inc.
Tomas Claudio St., Zamboanga City
(062)955-5811

Tec-Voc says:

3A Prime Hospitality Training and Assessment Center Inc.
362 Don Mariano Cui St. corner N. Escario St. Capitol Site, Cebu City
(032) 328-9150 Benedicto College, Inc
A.S. Fortuna St., Mandaue City, Cebu
(032) 3449320/ 345-6873/ 345-5790 Bering Institute of Skills Training and Assessment Center Inc.
Room 208, Conchita Building, Osmena Boulevard Barangay Sta. Cruz, Cebu City
0923-3373777 Cebu Call Center Academy Inc.
#79 VEG Building, General Maxilom Ave., Cebu City, Cebu
(032) 341-3220/ 0906-5282855/ 0921-8528404/ (032) 316-3655 Cebu Technical Vocational Training and Assessment Academy Inc.
Bai Center, Cebu South Road, Basak, San Nicolas, Cebu City
417-5254, 0933-3455013 (032) 417-5154 09430542776 Center for Industrial Technology & Enterprise (CITE) Technical Institute, Inc.
San Jose, Talamban, Cebu City
(032) 346-1611/344-0899/ 2462650 College of Technological Sciences-Cebu, Inc.
Natalio Bacalso Ave. Corner Rallos Sr. Street, Sambag 1, Cebu City
(032) 256-1302 to 04; 255-2331; Fax 254-2434 090798917562 ELE Technical Training & Assessment Center Corp.
4308 Osmeña St., Gunob, Lapu-Lapu City
238-2057/ 340-5476 Kapunungan Alang Sa Kauswagan Sa Kasadpan – Sugbu, Inc.
KAKASAKA Training Center, Barangay Ibo, Toledo City, Cebu, Philippines
(032) 384-9554 09162184269 Metrologyx Training and Assessment Center Inc.
Lot 6307-A-11-A, Barangay Cadulawan, Minglanilla, Cebu
344-0467/420-3848 Rosemont Hills Montessori College, Inc.
Deca Homes, Sabang, Danao City, Cebu, Philippines, 6004
0943-688-6789/0922-868-7314 / (032) 383-2392/517-3278 Saint James Academy of Skills Technology, Inc.
Poblacion, Compostela, Cebu
(032) 4258424/ 4258424 425-6061 2602649 Sisters of Mary Technical Education Institute, Cebu, Inc.
J.P. Rizal St., Talisay City, Cebu
272-6865, 272-3828 St. Cecilia’s College – Cebu, Inc.
Hi-way Poblacion, Minglanilla, Cebu
(032) 268-4746 / 09212923944 TESDA Technology Institute – RTC VII
Archbishop Reyes Ave., Salinas Drive , Lahug , Cebu City
412-7267 416-8876 TMJ Technology Skills Training Institute and Assessment Center
3F Southface Arcade Bldg., F. Deiparine St., Tabunok, Talisay City, Cebu
0933-5083888 University of San Jose-Recoletos Inc.
St. Ezekiel Moreno Building, Basak Campus, Pardo, Cebu City
(032) 354-8405/412-9511 Visayan Institute of Technology Agribusiness and Livelihood Skills Inc.
Sitio Tiltil Poblacion 2nd District, Samboan, Cebu, Region VII (Central Visayas), 6027
9663004538

Tec-Voc says:

A1Ventures Technical and Vocational Academy Inc.
815 Room 301, 3rd Floor CSP Building Que-zon Ave Santa Cruz, Quezon City
9558691867 Asia Pacific School of Arts and Sciences, Inc.
No. 16 & 18 Lands St., Brgy. Vasra Visayas Ave., Diliman Quezon City
332-1296/ 209-5111 Asian Institute of Computer Studies – Central, Inc.
AICS Bldg., Commonwealth Ave. corner Holy Spirit Drive, Brgy. San Antonio, Quezon City
935-1651/417-3356 Cane Town Colleges of the Philippines, Inc.
2nd Floor Rear Ablaza Building, 117 E. Rodriguez Sr. Avenue, Brgy. Tatalon, Quezon City
353-7981 Central Institute of Technology of Quezon City, Inc.
2nd Floor Our Home Bldg., 114 Malakas St. Diliman, Quezon City
Tel: 7757-1194/ 925-2554/435-7010/ 435-7000 Diliman Educational Corporation
Diliman Preparatory School, Commonwealth Avenue, Barangay Old Balara, Diliman, Quezon City
931-0728 / 931-1089 Gateways Institute of Science and Technology, Inc.
2/F Herminia Bldg., Commonwealth Ave., North Fairview, Quezon City
Tel: 641-3142/ 930-4478 IAB International Training Center Inc.
3rd Floor Family Life Center Bristol St. North Fairview, Quezon City
0933-8548105 Integrated Innovation and Hospitality Colleges, Inc.
C. I. Plaza Bldg. Zabarte Road Novaliches, Quezon City
754-9645 Mary the Queen College of Quezon City, Inc.
Commonwealth Ave., Rd. 44, Diiman, Quezon City
434-7192 / 434-4460 /435-4666 Mindbank Training & Skills Corporation
138 Timog Avenue, Barangay Sacred Heart, Quezon City
8536-7924 Our Lady of Lourdes School of Novaliches (OLLSN) Inc.
No. 9 Nightingale St. and No. 14 Woodpecker St., Zabarte Subdivision, Novaliches, Quezon City
9368664 Quezon City Lingkod Bayan Skills Development Center
Barangay Fairview Hall Compound, Dahlia Avenue, Quezon City
7799-9092/ 937-4248 SLDM Colleges of Quezon City Inc.
B1 L1 Salvador Avenue, cor. Quirino Highway, Jordan Plains, Quezon City
8552-6398 / 8370-3524 Trinity Polytechnic College Inc.
892 Alfina Building, Quirino Highway, Gulod, Quezon City
738-1713 WORLD CITI, INC.
960 Aurora Blvd., Quezon City
938-4850 loc. 132

Gaano naman po katagal bago ma enroll sa course? Nagtanong po kasi ako pag pasa po daw ng mga requirements hindi pa po kaagad ma enroll naka queue lng po ang application nio para makapag enroll

Tec-Voc says:

Tec-Voc says:

A1Ventures Technical and Vocational Academy Inc.
815 Room 301, 3rd Floor CSP Building Que-zon Ave Santa Cruz, Quezon City
9558691867 Asia Pacific School of Arts and Sciences, Inc.
No. 16 & 18 Lands St., Brgy. Vasra Visayas Ave., Diliman Quezon City
332-1296/ 209-5111 Asian Institute of Computer Studies – Central, Inc.
AICS Bldg., Commonwealth Ave. corner Holy Spirit Drive, Brgy. San Antonio, Quezon City
935-1651/417-3356 Cane Town Colleges of the Philippines, Inc.
2nd Floor Rear Ablaza Building, 117 E. Rodriguez Sr. Avenue, Brgy. Tatalon, Quezon City
353-7981 Central Institute of Technology of Quezon City, Inc.
2nd Floor Our Home Bldg., 114 Malakas St. Diliman, Quezon City
Tel: 7757-1194/ 925-2554/435-7010/ 435-7000 Diliman Educational Corporation
Diliman Preparatory School, Commonwealth Avenue, Barangay Old Balara, Diliman, Quezon City
931-0728 / 931-1089 Gateways Institute of Science and Technology, Inc.
2/F Herminia Bldg., Commonwealth Ave., North Fairview, Quezon City
Tel: 641-3142/ 930-4478 IAB International Training Center Inc.
3rd Floor Family Life Center Bristol St. North Fairview, Quezon City
0933-8548105 Integrated Innovation and Hospitality Colleges, Inc.
C. I. Plaza Bldg. Zabarte Road Novaliches, Quezon City
754-9645 Mary the Queen College of Quezon City, Inc.
Commonwealth Ave., Rd. 44, Diiman, Quezon City
434-7192 / 434-4460 /435-4666 Mindbank Training & Skills Corporation
138 Timog Avenue, Barangay Sacred Heart, Quezon City
8536-7924 Our Lady of Lourdes School of Novaliches (OLLSN) Inc.
No. 9 Nightingale St. and No. 14 Woodpecker St., Zabarte Subdivision, Novaliches, Quezon City
9368664 Quezon City Lingkod Bayan Skills Development Center
Barangay Fairview Hall Compound, Dahlia Avenue, Quezon City
7799-9092/ 937-4248 SLDM Colleges of Quezon City Inc.
B1 L1 Salvador Avenue, cor. Quirino Highway, Jordan Plains, Quezon City
8552-6398 / 8370-3524 Trinity Polytechnic College Inc.
892 Alfina Building, Quirino Highway, Gulod, Quezon City
738-1713 WORLD CITI, INC.
960 Aurora Blvd., Quezon City
938-4850 loc. 132

Tec-Voc says:

ACLC College of Manila, Inc.
Sampaloc Manila 2355 Legarda Corner Manrique Sts. Barangay 416, Sampaloc, City of Manila
373-3901 loc 8283 / 09175075807 / 09228561278 / 09214658058 Blueridge Pacific Institute Inc.
No. 357 W. Burke St., Binondo, Manila
87351055 Honorio Lopez Technical Institute Inc.
3rd Floor, Primeblock Buillding, Tutuban Center, C.M Recto Avenue, Barangay 247, Tondo Manila
8554-0568 Interface Computer College, Inc.
990 MCM Building, Quezon Blvd., Brgy. 464, Zone 46, District IV Sampaloc, Manila
8736-41-50 / 0916-513-7989 / 0923-394-4021 Kaizen Tech Institute of Manila Inc.
GF/3F 1745 Abdon St., Otis, Pandacan, Manila
0961-120-7812 Mary Chiles Hospital, Inc.
667 F. T Dalupan Sr. St. (Formerly Gastambide St.), Sampaloc, Manila
8711-42-33 / 0916-960-0645 / 0999-342-6589 Saint Mark Technical Vocational Institute Inc.
580 Florentino Torres, Brgy. 303, Sta. Cruz, Manila
757-0405/09367186943 Santa Celerina Institute of Technology (SCITec) Inc.
2248 Rizal Avenue Brgy. 347, Sta. Cruz, Manila
7257-7856/0968-321-0705 SEA Gem Training and Assessment Center, Inc.
Grd. Flr. Marbella II Bldg. 2071 Roxas Blvd. Brgy. 701, Malate, Manila
252-1192 SEAMAC International Training Institute, Inc.
867 G Tolentino Street, Sampaloc, Manila
7362279 St. Matthew of Blumentritt Institute of Technology (SMBIT) Inc.
2449 Rizal Ave. corner Cavite Street, Sta. Cruz, Manila
482-55-83 Training Center for Skills and Development, Inc.
911 Queen Rose Bldg. San Andres cor. L. Guinto St. Barangay 723 Malate Manila
395-17-27

Tec-Voc says:

Tec-Voc says:

AMA Computer Learning Center of San Pedro, Inc.
A. Mabini St., San Pedro, Laguna
9777382858 Angelita V. Del Mundo Foundation (AVM Foundation) Inc.
Vonwelt Building 3521 J.P. Rizal St., Poblacion II, Pagsanjan, Laguna
495017809 Areza Institute of Technology Inc.
Areza Town Center, Brgy. Canlalay, Biñan City, Laguna
(049) 411-5397 Computer Site Institute, Inc.
#15 Sto. Niño, San Pedro, Laguna
(02) 8847-6151 / 0942-422-0165 International Electronics and Technical Institute (Biñan), Inc.
6F Caridad Mendoza Business Center, Km. 33, National Highway, Biñan City, Laguna
(049) 511-9385/86 International Electronics and Technical Institute (Biñan), Inc.
6F Caridad Mendoza Business Center, Km. 33, National Highway, Biñan City, Laguna
(049) 511 – 9385/86 International Electronics and Technical Institute (Calamba), Inc.
No. 32 LE Burgos St., Brgy. San Jose, Calamba City, Laguna
(049) 545-62-80 Jacobo Z. Gonzales Memorial School of Arts and Trades
San Antonio, Biñan, Laguna
(049) 511-8059 LFS Training and Assessment Center, Inc.
National Hi-way, Brgy. Dayap, Calauan, Laguna
9297939631 Lord Yahweh Business Colleges & Maritime Academy Incorporated
109 San Marcos Street, Balian, Pangil, Laguna
9261003110 Marcelino Fule Memorial College
Del Pilar St. , Brgy. I. Alaminos, Laguna
(049) 5469800 Red Link Institute of Science and Technology Corp.
3/F South Timberland Bldg., Km. 50 Nat’l. Hiway, San Cristobal, Calamba City
049-5303549 San Pedro Technological Institute
Crismor Ave. Elvinda Village, San Pedro, Laguna
(02) 868-4975 Santa Rosa Manpower Training Center
BSRV-1 Brgy. Tagapo, City of Santa Rosa, Laguna
508-0392 Schola Angelicus, Inc.
Nia Road, Brgy. San Isidro, Cabuyao City, Laguna
09985846575 / 09275904425 STI College Sta. Rosa, Inc.
Sta. Rosa Commercial Complex, Balibago, Sta. Rosa, Laguna
049-837-2595 / 838 0491/534-2719/(02)668-4784/837-2595 The Big Five Training and Assessment Center Inc.
4th Floor Vitra Bldg., 123 P. Alcantara St., Barangay VII-A (Pob.) San Pablo City, Laguna
(049)591-0756 Trimex Colleges Inc.
Trojan Bldg., Poblacion City of Biñan Laguna
(049) 5119278

Tec-Voc says:

CCIT: COLLEGE OF COMMMUNICATION, INFORMATION AND TECHNOLOGY, INC.
Ogsoc St., Don Bernardo A. Neri, Calamba, Misamis Occidental
088-271-3980 International Electronics and Technical Institute (Calamba), Inc.
No. 32 LE Burgos St., Brgy. San Jose, Calamba City, Laguna
(049) 545-62-80 Red Link Institute of Science and Technology Corp.
3/F South Timberland Bldg., Km. 50 Nat’l. Hiway, San Cristobal, Calamba City
049-5303549

Tec-Voc says:

Please inquire below: AMA Computer Learning Center (ACLC) of Naga City, Inc.
4F Naga Land E-mall, Elias Angeles St., Naga City
472-4988 / 1388 Systems Plus College Foundation Inc.
Miranda & Rizal Sts., San Nicolas, Angeles City, Pampanga
(045)892-4758

Tec-Voc says:

College of Saint Amatiel Inc.
No. 118 Int. Gen. Luna St., Brgy. Ibaba, Malabon City
487-9404/ 351-4993 Headstart Training Center Corp.
4F St. Jerome Mansion, 82 Victoneta Ave., Potrero, Malabon City
9684471790 RVN Tech-Voc Inc.
#2 Inda Maria Rd., McArthur Highway, Bgy. Potrero, Malabon City
82759138/ 788-1082 St. Catherine Institute of Technology, Inc.
425 M. Blas St., Hulong Duhat, Malabon City
352-0859 / 736-7278, 09185292571

Tec-Voc says:

AMA Computer Learning Center of Malolos, Bulacan Inc.
Feliza Jazz Bldg, Mac Arthur Highway, Brgy, Sumapang Matanda, Malolos City, Bulacan
0917-5426175 AMG Skilled Hands Technological College
Cagayan Valley Road, Makapilapil, San Ildenfonso, Bulacan
(044) 901-1302/901-1328/ 9443262195 Asia-Pacific College of Arts and Management (ASPAC College), Inc.
2nd Floor, WBC Bldg., Mac Arthur Highway, Marilao, Bulacan
09061241180/ 09228755743 Asly International Training Center Inc.
Brgy Bagong Buhay, City of San Jose del Monte, Bulacan
9233964438 ATEC Technological College, Inc.
184 San Diego Bldg., Sta. Rita, Guiguinto, Bulacan
044 690-7705/ 760-3189/ 09179090501 Bestlink College of the Philippines – Bulacan Inc.
IPO Road, Minuyan Proper, Area A, City of San Jose del Monte, Bulacan
09486350582/ 09236140245 Colegio de Sto. Nino Meycauayan Corp
B3 Nucentro Town, EMA Town Center, El Camino, Camalig, Meycauayan, Bulacan
9178174793/ 09267945762/ 09359545498 College of Our Lady of Mercy of Pulilan Foundation, Inc.
Rizal St., Longos, Pulilan, Bulacan
(044) 676-2774/ 676-3003/ 09175500203 College of Saint Adela,Inc.
Daang Barrio, Poblacion I, City of San Jose del Monte, Bulacan
(044) 91-4921 Greentech Innovation & Entrepreneurial Institute, Inc.
566 Jaca Bldg., Banga I, Plaridel, Bulacan Integrated College of Business and Technology, Inc.
Dr. Gonzales St., Tibag, Baliwag, Bulacan
044-766-6966/ 766-7381/ 09176884788/ 044-798-8163 MERR-C Society Academy
24 De Agosto St. Maunlad Subd, Caingin, Malolos City, Bulacan
9189136594 Richwell Colleges Incorporated
Gen. Alejo Santos Road, San Jose, Plaridel, Bulacan
09175431103/ 09206544145/ 09328618812 Victory Global Technological College, Inc.
1119 Purok 3, San Agustin, Hagonoy, Bulacan
0916-887-9597 / 0922-984-1665

How to apply for Computer Systems Services NCII, need po kasi sa aapplyan ko na work. Sana may mai-recommend po sakin. Current location ko po ay Cavite City po.

Tec-Voc says:

Datacom Institute of Computer Technology Corporation
9115 General Trias Drive, Tejeros Convention,
(046) 437-1938 Datacom Institute of Computer Technology Corporation
VMI Bldg., General Emilio Aguinaldo Hi-way, Palico I, Imus City, Cavite
(046) 471-5508 Imus Computer College, Inc.
2/F Lot C & D Paseo Square, Paseo de Carmona, Carmona, Cavite
(046)482-0595 Informatics College Cavite, Inc.
E. Aguinaldo Highway, Tanzang Luma V, Imus, Cavite
(046)471-2310/ 474-0389 International Electronics and Technical Institute (Imus), Inc.
SC Realty Bldg., E. Aguinaldo Hiway, Tanzang Luma III, Imus, Cavite
(046) 471-9337 Sisters of Mary Technical Education Institute Cavite Inc.
Boystown, Brgy. Adlas, Silang, Cavite
(046) 865 2830/ 423 7873

Tec-Voc says:

Please inquire below: Provincial Training Center – Davao (Mintal)
Poinsettia St., Brgy. Mintal, Tugbok District, Davao City